Description Of Symbols; Safety Instructions; General Information; Handling - Renkforce 2616623 Bedienungsanleitung

6 Description of symbols

The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.

7 Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do
not follow the safety instructions and information on proper handling in this manual, we assume
no liability for any resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.

7.1 General information

The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous playing material for
children.
If you have questions which remain unanswered by these operating instructions, contact our technical support
service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

7.2 Handling

Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Before cleaning or handling cable connections, always turn off and unplug the monitor and all connected (to be
connected) devices.
Do not scratch or poke the screen with your fingernails or any hard or sharp objects to avoid damage.

7.3 Operating environment

Do not place any objects filled with liquids near the device (such as drinks or flower vases) to avoid electric
shock or hazards.
Protect the product from high humidity and moisture.
Do not install the product on an unstable desk or hollow wall that cannot support the weight of the product.
Do not block or cover the ventilation holes or any openings on the product with foreign objects.
Do not cover or place any object on the product to avoid possible damage or personal injury.
Do not place the product under any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, steam and solvents.
Protect the product from direct sunlight.
Do not switch the product on after it has been taken from a cold to a warm environment. The condensation that
forms might destroy the product. Allow the product to reach room temperature before you use it.
Never operate the product in direct proximity of strong magnetic or electromagnetic fields or transmitter aerials or
HF generators. Doing so can prevent the product from functioning properly.
16