Intended Use; Symbols; Features - Renkforce MO900138DC Bedienungsanleitung

3. Intended use

The monitor is used to play back audio and video signals of externally connected and compatible cameras
in vehicles.
This device is only approved for connection to 12-24 V direct voltage on-board grids with the negative pole
of the battery to the car body. The device must only be installed and operated in vehicles with this kind of
on-board voltage.
The user must make sure that the way the product is installed protects the product from humidity and
wetness.
Any use other than that described above will damage this product and involves the risk of short circuit,
fire, etc.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!

4. Symbols

The exclamation mark indicates important notes in these operating instructions that must be
strictly observed.
The arrow symbol indicates special advice and operating information.

5. Features

• Connections for two side and one reversing camera (for compatible camera, see order no. 1408522)
• Suitable for 12 V- and 24 V-on-board voltage
• Touch operating buttons at the screen
• Integrated speaker
• All functions can be controlled via remote control as well
• Automatic brightness adjustment of the screen
• Auto-scan-function for the camera inputs
• Mirroring function for all three camera inputs and the monitor screen
• Integrated power supply (12 V) for compatible cameras
18