Baking Bread; Place The Ingredients In The Bread Pan - Panasonic SD-ZB2502 Bedienungsanleitung

Baking Bread

Kneading blade
1
Remove the bread pan and
set the kneading blade
Check around the shaft
and inside the kneading
blade and ensure that
they are clean. (P.31)
• When baking rye bread, use the
specified kneading blade.
• The kneading blade fits loosely into place, but it must
touch the bottom of the bread pan.
Baking bread with added ingredients
14

Place the ingredients in the bread pan

 Twist the bread pan round.
 Remove the bread pan.
 Place the kneading
blade firmly into the shaft.
(P. 16)
Clean and dry
beforehand
 Open the dispenser lid.
 Place the ingredients.
 Close the lid.
Yeast dispenser
2
Place the measured ingredients
in the bread pan
3
Place the dry yeast in the yeast
dispenser
4
Plug the Bread Maker
into a 230 V socket
Turn to P. 23, 24
for bread recipes
 Place the dry ingredients
except dry yeast.
(flour, sugar, salt, etc.)
• Flour must be weighed on
scales.
 Pour in the water and any other
liquids.
 Wipe off any moisture and flour
from the outside of the bread
pan.
 Place the bread pan inside
the Bread Maker by turning it
slightly from right to left. Fold
the handle down.
 Close the lid.
• Don't open the lid until bread
is complete (affects bread
quality).
If the yeast dispenser is wet, absorb
wetness with tissue etc.
(Do not rub the yeast dispenser,
otherwise the yeast will not drop
into the bread pan due to static.)