4.11.
Headset connector
The headset connection facility is located on the underside of the
handset.
Calls are received as normal when the headset is connected to the
handset. You will then hear the person you are talking to in the earpiece
and your voice will be transmitted by means of the microphone in the
headset.
It is also possible to switch to handsfree mode when using the headset.
4.12.
Temporary tone dialling
If you can only use your telephone in Pulse Dialling mode, you do not
have to forego the facilities of Tone Dialling (e.g. interrogating an
answering machine).
You can change temporarily to Tone Dialling during a call by pressing of
the
button for two seconds. In the display appears T.
PULSE dialling will be reselected at the end of the call.
66
- Operation -