9. Private exchanges/T-NET
You can use the "R" signal button
exchanges and when using DEUTSCHE TELEKOM's T-Net functions.
9.1.
"R" Button on private exchanges
If you have connected your telephone to a private exchange, you can
use all the facilities such as call transfer, automatic recall, etc. The "R"
signal button gives you access to these facilities. The FLASH time
"90ms" will be required on a private exchange (Adjustment, see 9.3).
You can find out from the dealer from whom the equipment was
purchased whether your telephone will work on your private exchange
without any problems.
9.2.
"R" Button and the DEUTSCHE TELEKOM T-Net
Your telephone supports the most important DEUTSCHE TELEKOM
added value functions (e.g. brokering, call waiting, three-way
conference, etc.). The T-Net works using the "FLASH 270 ms" setting.
(Adjustment, see 9.3). Please contact DEUTSCHE TELEKOM to gain
access to T-Net functions.
9.3.
Changing the Flash time
The two flash times 90ms und 270ms are available.
Press the Menu display button
Select Base Settings with
Select Flash Time with
Select the required Flash time of 90 m or 270 ms with
confirm with OK.
Exit the menu by pressing the Back display button repeatedly.
- Private exchanges -
and
and
R
on your telephone on private
and press OK.
and press OK.
and
and
85