Herunterladen Inhalt Inhalt Diese Seite drucken

How To Replace An Active Airclean Filter Or An Airclean+ Filter; Replacing One Type Of Exhaust Filter With Another; When To Change The Thread Lifters; How To Replace The Thread Lifters - Miele HS07 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für HS07:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
en
How to replace an Active AirClean
filter or an AirClean+ filter (dia. 29 +
30)
Do not use more than one exhaust
filter at a time.
^ Press the button on the rear of the
vacuum cleaner and remove the lid
(dia. 26).
^ Take out the used Active AirClean or
AirClean+ filter.
^ Insert a new Active AirClean or
AirClean+ filter.
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".
^ Put the lid back on and close it.
Replacing one type of exhaust filter
with another
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters
(dia. 25):
a AirClean
b Active AirClean (SF-AAC 10)
c AirClean+ (SF H 10)
You can replace the filter supplied with
the vacuum cleaner with one of the
other filters listed above.
Do not use more than one exhaust
filter at a time.
The exhaust filters have different
properties (see "Optional accessories").
36
When changing the filter please note:
1. If you wish to replace exhaust filter a
with filter b or c, it is essential that you
remove the filter grille from the lid
before you fit the new filter.
2. If you wish to replace exhaust filter b
or c with filter a, it is essential that you
also fit the filter grille * in the lid.
* Filter grille - see "Optional
accessories".
To remove or insert the filter grille
(dia. 31)
^ Grasp inside the hexagons in the
filter grille in the positions shown by
the arrows and squeeze slightly. The
grille can then be removed or
inserted.

When to change the thread lifters

The thread lifters on the suction inlet to
the floorhead can be replaced.
Check them from time to time and
replace them if the pile has worn down.

How to replace the thread lifters

(dia. 32)
^ Use a suitable screwdriver to remove
the thread lifters from the slots.
^ Fit new thread lifters.
Replacement parts are available from
your Miele Dealer or from Miele (see
end of booklet for contact details).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis