When To Change The Motor Protection Filter; How To Change The Dust Compartment Filter; When To Replace The Exhaust Filter; How To Replace The Airclean Filter - Miele Swing H1 SAA Serie Gebrauchsanweisung

en
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.

A safety device prevents the lid
closing without a dustbag in place.
Do not use force!
When to change the motor protection
filter
Replace this filter every time you start a
new packet of dustbags.
Every packet of original Miele dustbags
contains a motor protection filter. Mul-
tipacks contain four motor protection
filters.
How to change the dust compart-
ment filter (dia. 27)
 Open the dust compartment lid.
 Unclip the yellow filter frame, re-
move the old filter and replace with a
new one.
 Close the filter frame making sure the
catch engages.
 Close the dust compartment lid mak-
ing sure it clicks into position.

When to replace the exhaust filter

Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
28):
a AirClean
Replace this filter every time you start a
new packet of dustbags. Every packet
of original Miele dustbags contains one
exhaust filter.
40
b Active AirClean
c AirClean Plus
Replace these filters once a year. Make
a note of the date on the filter.

How to replace the AirClean filter

(dia. 29, 30 + 31)
Do not use more than one exhaust fil-
ter at a time.
 Press the button on the rear of the
vacuum cleaner and remove the
cover.
 Grasp the used AirClean filter by the
clean, unsoiled section and take it out
(see arrow).
 Replace it with a new AirClean filter.
If you wish to fit an Active AirClean
or AirClean Plus filter please see
"Replacing one type of exhaust filter
with another".
 Put the cover back on and close it.
How to replace an Active AirClean fil-
ter or an AirClean Plus filter
(dia. 32 + 33)
Do not use more than one exhaust fil-
ter at a time.
 Press the button on the rear of the
vacuum cleaner and remove the
cover (dia. 29).
 Take out the used Active AirClean or
AirClean Plus filter.
 Insert a new Active AirClean or
AirClean Plus filter.