Herunterladen Inhalt Inhalt Diese Seite drucken

Preparing For Use; Using The Accessories Supplied - Miele HS07 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für HS07:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these operating
instructions.

Preparing for use

Attach the suction tube (dia. 1)
^ Fit the suction tube with the square
hole facing upwards into the body of
the vacuum cleaner and twist gently
until it clicks into place.
To remove the suction tube
^ Press the release button (see detail)
and pull off the tube with a gentle
twist.
Attach the handle to the suction tube
(dia. 2)
^ Fit the handle with the square hole
facing upwards into the tube and
twist gently until it clicks into position.
^ To release the handle from the sucti-
on tube, press the release button and
pull the handle out of the suction
tube, twisting it slightly as you do so.
The handle can also be fitted directly to
the body of the vacuum cleaner (dia. 3).
The vacuum cleaner is then easier to
use, e.g. when vacuuming e.g.
mattresses, upholstery etc.
Attach the standard floorhead (dia. 4)
^ Attach the floorhead to the vacuum
cleaner connection stub and twist
gently until it clicks into position.
^ To remove the floorhead, press the
release button and pull the vacuum
cleaner away from the floorhead
twisting it slightly as you do so.
The suction tube can also be attached
to the vacuum cleaner connection stub
(dia. 5).
This is useful for vacuuming underneath
low furniture, for example.
Cable tidy (dia. 6)
When the vacuum cleaner is not in use
the cable can be wound around the two
cable hooks.
Secure the cable by clamping the plug
to the cable (see detail).
Using the accessories
supplied (dia. 7)
The following accessories are supplied:
a Accessories clip
(depending on model)
b Crevice nozzle
c Upholstery nozzle
Accessory clip (dia. 8)
(depending on model)
^ If required, attach the accessory clip
to the suction tube.
^ Push the accessory clip down over
the cable hook ring until it clicks into
position.
The accessory clip holds the crevice
nozzle and upholstery nozzle supplied
(dia. 9).
en
31

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis