How To Replace The Airclean Filter; How To Replace An Active Airclean Filter Or An Airclean+ Filter; Replacing One Type Of Exhaust Filter With Another - Miele Swing H01 Gebrauchsanweisung

en
b Active AirClean
c AirClean+
These types of filter need to be
changed approx. once a year. Make a
note of the date on the filter.

How to replace the AirClean filter

(dia. 26, 27 + 28)
Do not use more than one exhaust fil‐
ter at a time.
 Press the button on the rear of the
vacuum cleaner and remove the lid.
 Grasp the used AirClean filter by the
clean, unsoiled section and take it
out.
 Replace it with a new AirClean filter.
If you wish to fit an Active AirClean
or AirClean + filter please see "Re‐
placing one type of exhaust filter
with another".
 Put the lid back on and close it.
How to replace an Active AirClean fil‐
ter or an AirClean+ filter (dia. 29 + 30)
Do not use more than one exhaust fil‐
ter at a time.
 Press the button on the rear of the
vacuum cleaner and remove the lid
(dia. 26).
 Take out the used Active AirClean or
AirClean+ filter.
 Insert a new Active AirClean or Air‐
Clean+ filter.
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".
40
 Put the lid back on and close it.
Replacing one type of exhaust filter
with another
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
25).
a AirClean
b Active AirClean (SF-AAC 10)
c AirClean+ (SF H 10)
You can replace the filter supplied with
the vacuum cleaner with one of the oth‐
er filters listed above.
Do not use more than one exhaust fil‐
ter at a time.
When changing the filter please note:
(dia. 31)
1. If you wish to replace exhaust filter a
with filter b or c, it is essential that
you remove the filter grille from the
lid before you fit the new exhaust fil‐
ter.
2. If you wish to replace exhaust filter b
or c with filter a, it is essential that
you also fit the filter grille * in the lid.
* Filter grille - see "Optional accesso‐
ries".
To remove or insert the filter grille
(dia. 31)
 Grasp inside the hexagons in the filter
grille in the positions shown by the
arrows and squeeze slightly. The gril‐
le can then be removed or inserted.