When To Change The Dust Compartment Filter (For Motor Protection); How To Change The Dust Compartment Filter; When To Replace The Exhaust Filter; How To Replace The Airclean Filter - Miele HS07 Gebrauchsanweisung

en
 It should be unfolded as far as pos-
sible in the dust compartment.
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.

The lid will not close without a
dustbag in place. Do not force it!
When to change the dust compart-
ment filter (for motor protection)
Replace this filter every time you start a
new packet of dustbags. A dust com-
partment filter is supplied with every
packet of Miele dustbags.
How to change the dust compart-
ment filter (dia. 24)
 Open the dust compartment lid.
 Unclip the yellow filter frame, re-
move the old filter and replace with a
new one.
 Close the filter frame making sure the
catch engages.
 Close the dust compartment lid mak-
ing sure it clicks into position.

When to replace the exhaust filter

Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
25):
a AirClean
Replace this filter every time you start a
new packet of Miele dustbags. An
AirClean exhaust filter is supplied with
every packet of Miele dustbags.
40
b Active AirClean
c AirClean+
These types of filter need to be
changed approx. once a year. Make a
note of the date on the filter.

How to replace the AirClean filter

(dia. 26, 27 + 28)
Do not use more than one exhaust fil-
ter at a time.
 Press the button on the rear of the
vacuum cleaner and remove the lid.
 Grasp the used AirClean filter by the
clean, unsoiled section and take it
out.
 Replace it with a new AirClean filter.
If you wish to fit an Active AirClean
or AirClean + filter please see "Re-
placing one type of exhaust filter with
another".
 Put the lid back on and close it.
How to replace an Active AirClean fil-
ter or an AirClean+ filter (dia. 29 + 30)
Do not use more than one exhaust fil-
ter at a time.
 Press the button on the rear of the
vacuum cleaner and remove the lid
(dia. 26).
 Take out the used Active AirClean or
AirClean+ filter.
 Insert a new Active AirClean or
AirClean+ filter.
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".