Herunterladen Inhalt Inhalt Diese Seite drucken

How To Replace The Dustbag; When To Change The Dust Compartment Filter (For Motor Protection); How To Change The Dust Compartment Filter; When To Replace The Exhaust Filter - Miele HS07 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für HS07:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
How to replace the dustbag (dia. 21,
22 + 23)
^ Press the dust compartment release
button and raise the lid.
^ Holding the bag by the collar, lift it
away from the suction socket and
then pull it out of its holder.
The dustbag has a closing flap which
closes automatically when the dustbag
is removed from the vacuum cleaner to
prevent any dust escaping.
^ Fit the new dustbag into the yellow
holder as far as it will go. Leave it
folded up when you take it out of the
box.
^ It should be unfolded as far as
possible in the dust compartment.
^ Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.
,
The lid will not close without a
dustbag in place. Do not force it!
When to change the dust
compartment filter (for motor
protection)
Replace this filter every time you start a
new packet of dustbags.
A dust compartment filter is supplied
with every packet of Miele dustbags.
How to change the dust
compartment filter (dia. 24)
^ Open the dust compartment lid.
^ Unclip the yellow filter frame,
remove the old filter and replace with
a new one.
^ Close the filter frame making sure the
catch engages.
^ Close the dust compartment lid
making sure it clicks into position.

When to replace the exhaust filter

Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters
(dia. 25):
a AirClean
Replace this filter every time you start a
new packet of Miele dustbags. An
AirClean exhaust filter is supplied with
every packet of Miele dustbags.
b Active AirClean
c AirClean+
These types of filter need to be
changed approx. once a year. Make a
note of the date on the filter.
How to replace the AirClean exhaust
filter (dia. 26, 27 + 28)
Do not use more than one exhaust
filter at a time.
^ Press the button on the rear of the
vacuum cleaner and remove the lid.
^ Grasp the used AirClean filter by the
clean, unsoiled section and take it
out.
^ Replace it with a new AirClean filter.
If you wish to fit an Active AirClean
or AirClean+ filter please see
"Replacing one type of exhaust filter
with another".
^ Put the lid back on and close it.
en
35

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis