Miele HS07 Gebrauchsanweisung Seite 25

~
Ensure that the connection data on the data plate of the
vacuum cleaner (voltage and frequency) match the mains
electricity supply exactly.
~
The mains electrical plug must be fitted with an
appropriate fuse.
~
In areas with fluctuating power supplies the vacuum
cleaner may suffer a temporary drop in power. If the supply
impedance at the point of connection to the electrical
supply exceeds 0.457 Ohm, further measures may be
required before the vacuum cleaner can be connected to
this supply and operated as normal. If necessary check the
impedance with your local energy supply provider.
~
While the vacuum cleaner is under guarantee, repairs
should only be undertaken by a Miele authorised service
technician. Otherwise the guarantee will be invalidated.
~
Do not pull or carry the vacuum cleaner by the cable,
and be careful not to damage the cable when withdrawing
the plug from the socket.
Keep the cable away from sharp edges and do not let it
get squashed, for example, under a door.
This could damage the cable, plug or socket and pose a
risk to your safety.
~
Do not use the vacuum cleaner if the cable is damaged.
If the cable is damaged it must be replaced with an
original Miele cable. For safety reasons this work must be
done by the Miele Service Department or a Miele
authorised service technician.
en - Warning and Safety instructions
25