Load Current Measurement I-L - TESTBOY TV 470 Bedienungsanleitung

Load current measurement I-L

(Only in manual mode, no storage)
Connect the DUT to the test socket. In the manual mode, choose the load
current measurement (I-L) option and confirm your selection by pressing
"Select". The DUT is supplied with mains voltage during measurement and
the display shows the load current.
®
Testboy TV 470
WARNING
Never carry out these measurements until the PE conductor
resistance and the insulation resistance measurements have
been successfully carried out!
The DUT is connected to the mains voltage during measure-
ments. Therefore, be careful with devices that emit heat or
have moving parts!
Preparing for first-time use
63