Preparations - Rollei 5S Anleitung

(2). Put the Rollei 5S video camera into the waterproof housing
video camera Waterproof
housing
** To remove the TFT screen, press the PUSH snap button and then remove it.**
2. Installing the Remote Controller
The Rollei 5S video camera is equipped with an independent remote controller, which can be
placed at different positions, depending on the accessories.
(1). Velcro

Preparations

Before using the Rollei 5S video camera, complete the following preparations:
① Power on the Rollei 5S video camera and check the power level.
Turn the power switch to the "ON" position to initiate the system. After the red indicator is on, the
corresponding symbols on the LCD screen turns on and then the system enters the preview state. On
the LCD segment screen, you can find the following information:
A Recording mode: The current recording mode is displayed on the LCD segmen screen. The icon
" " indicates the video mode, whereas the icon "
B Photo mode: The "
shooting.
C Power symbol: The "
is working, this icon is constantly on. If this icon disappears, it indicates the Rollei 5S video camera
is in power-off or standby state.
D Video recording duration: In the medium row of the LCD segmen screen displays the duration of
the current recording video, for example,
once to display the duration of the video recording, and press the "Stop"key once to hide the
duration.
Note:The duration for video recording on the LCD segment screen is synchronously displayed with that
on the TFT screen.
E Battery capacity indication: The"
This icon indicates the battery level when the video camera is powered on. The more bars the
power indicator has, the more power the battery has.
Note: When the video camera is in the standby or power-off state, the power icon is not displayed.
F USB connection mode: The "
connected to a computer. When the video camera is powered on and connected to a computer,
this icon is lit with the green indicator on the left side blinking slowly. When the video camera is
not connected to a computer, this icon is not displayed.
Put the video camera into
the waterproof housing
(2). Back clip
" (shooting) icon is displayed on the screen. This icon blinks once for each
"(power supply) icon is displayed in the upper-right corner. When the system
005:20
"(battery capacity) icon is displayed in the bottom-left corner.
"(USB mode) icon indicates whether the video camera has been
(3). Binding strap
(provided by users)
" indicates audio mode.
. In the preview state, press the "Video"key
-5-
EN