Rollei 5S Anleitung Seite 10

If you set this parameter to "ON", the video camera automatically records the date and time
during video recording and displays them in the bottom-right corner of the screen. If you set this
EN
parameter to "OFF", the video camera does not display the date and time during video recording.
（The display time function is unavailable for video recording 1080i, 960P/48f, 960P/50f ,
480P/100f and 480P/120f modes.）
Note:
a. In audio recording mode, press the "Video" key once to start audio recording. The audio
recording duration is displayed in the upper-right corner of the TFT screen, and the green indicator
blinks slowly. Press the "Stop" key to stop and store the currently recorded audio file. In such a
situation, the green indicator is off, and the red indicator is constantly on (the operation prompt
is displayed on the LCD segment screen), and the video camera restores to the state for audio
recording.
b. During audio recording, the video camera responds only to the "Stop", "Power off" keys.
c. When the laser SYNC video function is enabled, the laser icon is displayed in the upper-left corner
of the preview screen, indicating that the video camera is in such a shooting mode. The laser will
be turned on when recording starts and be turned off automatically in 20 seconds.
d. When the pre-video and auto video functions are both enabled, press the "Video" key to
automatically record the time in reverse counting mode; press the "Video" key again, the last a
few seconds of the pre-recorded video will be saved as the starting part of the video recording file.
② Set camera parameters
a. Resolution: Select the required resolution for shooting. You can set this parameter to "8M", "12M"
or "16M"(interpolated).
b. single shot : When the camera is set to the single-key shooting mode, one picture is captured
when the "Photo" key is pressed once.
c. Fast shot: three fast-shot modes are available: 3 p/s, 6 p/s and 10 p/s (photo/second). Select the
desired mode and press Photo key, the camera will take pictures for one second with prompt
tones.
d. Auto cont capture: Pictures is captured at intervals of 0.5s,1s, 2s, 3s, 5s, 10s, 20s ,30s or 60s until
the " Stop " key is released, the memory card is full, or the battery power is low.
e. Timed shooting: Select the reverse-counting time for auto-shooting (This parameter can be set to
OFF, 3s, 5s, or 10s), and choose "Timed Shooting" and press the "M" key to return to the
preview state. Then press the "Photo" key to start reverse counting timer. When the preset time
is reached, the auto-shooting indicator blinks, and the camera takes a picture. To restore to other
shooting modes, set "Timed Shooting" to "OFF". Otherwise, the camera maintains in timed
shooting mode.
f. Display time: In the preview state, press the "M" key. On the setup interface, choose "Display
Time". If you set this parameter to ON in advance, the camera automatically records the date and
time during shooting and displays them in the bottom-lower corner of the photo. If you set this
parameter to OFF in advance, the camera does not display the date and time during shooting. (The
display time function is unavailable for photo shooting in 1080i, 960P/48f, 960P/50f, 480P/100f ,
and 480P/120f modes.)
Note:
a. The timed shooting function and other shooting functions cannot be simultaneously enabled. Set
Timed shooting to "OFF" to restore to the other shooting modes. Otherwise, the camera is
defaulted in timed shooting mode.
b. In single shot mode, the "Auto cont". capture parameter is automatically set to "OFF".
-8-