Rollei 5S Anleitung Seite 17

11. Connecting the HDMI Output
In the preview state, connect the Rollei 5S video camera to an HD display device using an HDMI
patch cord. After being connected to the HD display device, the Rollei 5S video camera can
implement all its functions.
Note:
Incorrect removal of the HDMI patch cord may result in exceptions on the Rollei 5S video camera. After
being restarted, the Rollei 5S video camera can restore to the normal state.
12. Prompt Tones upon Operations
The Rollei 5S video camera can generate various prompt tones upon operations.
a. In normal cases, the Rollei 5S video camera generates a tick tone, indicating that the operation is
valid when you press the "Video" or "Photo" key once.
b. Upon stopping video recording, the Rollei 5S video camera generates a tick tone twice, indicating
that the video recording operation stops.
c. If code pairing is successful upon a power-on operation, the Rollei 5S video camera generates a
tick tone twice, indicating that the code pairing operation is successful.
d. During video recording, the Rollei 5S video camera does not generate a tick tone when you press
the "Photo" key.
e. When any operations are performed on the TFT screen, you can enable or disable the function for
generating a tone. Specifically, press the "M" key when the Rollei 5S video camera is in the preview
state. Then press the "<" or ">" key to display the "Setup" menu. Press the "+" or "–" key, and
select "Prompt tone".
f. During video recording, the Rollei 5S video camera generates a tick tone twice, indicating that the
video recording operation stops when you press the "Stop" key on the remote controller once.
g. During video recording, no prompt tone is generated by the Rollei 5S video camera or by the
speaker on the TFT screen when you press the "Photo" key on the remote controller once.
h. In the standby state, the Rollei 5S video camera generates a tick tone twice, indicating that the
main system starts when you press a key on the remote controller.
13. Turning On/Off the TFT Screen
a. After the Rollei 5S video camera is powered on, you can press and hold the "Photo" key for three
seconds to turn on or off the TFT screen.
b. The "Photo" key on the remote controller does not provide the function for turning on or off the
TFT screen.
-15-
EN