Storage And Play Of A File - Rollei 5S Anleitung

1. Connecting a USB Data Cable
After video recording is complete, you can copy the recorded images to a computer for play by using
EN
a USB data cable. You can also remove the Micro SD card from the Rollei 5S video camera and access
the image data by using a sensor. The Media Player software is preferred for playing a file.
Note:
a. Before removing the USB data cable, power off the Rollei 5S video camera.
b. When the power switch is in the "OFF" position, you can recharge the battery on the Rollei 5S
video camera. At this time, the red indicator blinks slowly.
c. When the power switch is in the "ON" position, you can copy the recorded files from the Rollei 5S
video camera to the computer.
2. Connecting with an HDMI Cable or an AV Cable,You can play recorded files on a TV set or a monitor
that has a HD port, using an HDMI cable to connect the Rollei 5S video camera to the TV set or
monitor.
Note:
a. After connecting to a monitor by HDMI cable, select the proper input source for the Rollei 5S video
camera to play files.
b. When using an AV cable, connect the terminals of the AV data cable to the ports in the same color
on the TV set or monitor. Ensure that the TV set or monitor is properly grounded.
c. Adjust the parameter settings of the monitor to achieve the optimal display effect.
Rollei 5S
USB interface
USB data cable
Rollei 5S
AV interface
TV set
AV data cable AV interface
Rollei 5S
HDMI interface HDMI data cable
-16-

Storage and Play of a File

Computer
USB interface
TV set or monitor
TV set or
HDMI interface