Clearaudio EMOTION SE Bedienungsanleitung Seite 14

Satisfy Carbon
Now connect your
You can find more information on adequate phono-preamplifiers and interconnects on our
Website: www.clearaudio.de
Only if you have static problems with your record, then it is
necessary to ground your bearing. Please connect the ground
wire with the bearing on the upper side of the chassis
(see pic. 15).
The set up is now completed.
Please pay attention!
Emotion SE
If the is a longer time not in use, please switch the turntable on the main switch
on the motor completely off!
You will find the main switch on the motor (see picture):
Pic. 16: Main switch
We wish you a lot of pleasure with your new
Your Clearaudio-team
Page / Seite 13
- tonearm with the phono input of your phono-preamplifier.
I = ON
O = OFF
Emotion SE
Emotion SE
User manual / Bedienungsanleitung
Pic. 15: Connecting the ground wire to
the turntable
- turntable.
 Clearaudio electronic GmbH 2013