Dimensions; Laser Targeting Light; Optics - LumaSense Technologies IN 5 Betriebsanleitung

IMPAC-Pyrometer IN 5-H-PL2
2

Dimensions

3

Laser targeting light

For aligning, the IN 5-H-PL2 has an integrated laser targeting light. The target-
ing light is switched on by a short push on the push button at the rear cover.
The laser is focused at a distance of 100 mm. After 2 minutes the targeting
light is turned off automatically. Operating temperatures above 50°C will switch
off the laser targeting light automatically.
4

Optics

6
Push button for
targeting light