Copyright; Disposal / Decommissioning; Safety; Appropriate Use - LumaSense Technologies IN 5 Betriebsanleitung

IMPAC-Pyrometer IN 5-H-PL2

Copyright

All copyrights reserved. This document may not be copied or published, in part
or completely, without the prior written permission of LumaSense Technolo-
gies GmbH. Contraventions are liable to prosecution and compensation. All
rights reserved.

Disposal / decommissioning

Inoperable IMPAC pyrometers have to be disposed corresponding to the local
regulations of electro or electronic material.

Safety

Each person working with the pyrometer must have read and understood the
user manual before operation. Also this has to be done if the person already
used similar instruments or was already trained by the manufacturer.
The pyrometer has only to be used for the purpose described in the manual. It
is recommended to use only accessories offered by the manufacturer.
Follow common safety regulations for mains voltage (230 or 115 V AC) con-
necting additional devices operating with this mains voltage (e.g. transform-
ers). Touching mains voltage can be fatal. An incorrect connection and mount-
ing can cause serious health or material damages.
Only qualified specialists are allowed to connect such devices to the mains
voltage.

Appropriate use

The IMPAC pyrometer IN 5-H-PL2 is a stationary infrared thermometer for
non-contact temperature measurement of non-metallic surfaces or painted,
coated or anodized metals with a temperature range from 0 to 250°C.
4