Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning; A) Cleaning; Fuse Replacement - Renkforce 1282378 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The music control does not work:
• Music control is not enabled.
• The music playback is too quiet. Try using a higher playback volume.
• Test the integrated microphone by tapping your finger on the casing. The sound-to-light control should
respond to these impulses.

13. Maintenance and cleaning

Regularly check the technical safety of the moving head, e.g. for damage to the mains cable or the casing.
Always observe the following safety instructions before cleaning or servicing the moving head:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work
is carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all power sources.
Only qualified technicians familiar with the potential hazards and the relevant regulations must
perform repairs.

a) Cleaning

Never use aggressive and abrasive detergents, rubbing alcohol or other chemical solutions,
as these could damage the casing or even impair the functioning of the product.
• Do not immerse the product in water.
• Always disconnect the product and any connected devices from the mains before cleaning it.
• You can use a clean, soft and dry cloth to clean the product. Dust can be easily removed using a clean
and soft brush.
• Leave maintenance or repair work to an expert.
b) Fuse Replacement
If the event that you need to replace the fuse, ensure that you only use fuses of the specified type and rated
current as a replacement (see "Technical data").
Never repair fuses or bridge the fuse holder.
• Unplug the mains plug from the mains socket and disconnect the low-voltage cable from the mains
connection on the device.
• Using a suitable screwdriver, carefully lever the fuse holder (9) containing the defective fuse from the
mains connection on the device.
• Remove the defective fuse and replace it with a new fuse of the specified type.
48

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis