Renkforce 1282378 Bedienungsanleitung Seite 37

• Use the DOWN / UP buttons to select the desired option for the menu item chosen and confirm your
selection with the ENTER button.
• Press the MENU button to go back a step in the menu.
Menu overview
Display Option
INTRO ---d001 - d512
ADDRESS
INTRO YES/NO
RESET
INTRO DMX512
RUN AUTO1
AUTO2
SOUND1
SOUND2
CUSTOM
TEST
SLAVE
INTRO BASIC /
ADVANCED
CHANNELS
INTRO BRIGHT
DISPLAY 60 CLOSE
INTRO YES/NO
KEYLOCK
INTRO V1.1
INFO
Meaning
Set the DMX starting address if an LED moving head is to be
operated in a DMX chain.
Restart
DMX512 = DMX control
AUTO1 = Automatic mode (when stood up)
AUTO2 = Automatic mode (for overhead installation)
SOUND1 = Sound-to-light mode (when stood up)
SOUND2 = Sound-to-light mode (for overhead installation)
CUSTOM = Standalone operation in set mode (scenes can be
set under 'EDIT').
TEST = Test run of the device's functions
SLAVE = Operated using the controller on another moving head
(the master device)
BASIC = 11-channel mode
ADVANCED = 14-channel mode
Backlight constant
Backlight turns off after 60 s (black screen)
Turn on key lock.
Password to turn off key lock: Press the button combination [UP
DOWN UP DOWN] and then confirm using the ENTER button.
Information on the software version of the device.
37