Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
• Make sure the power switch is in O position.
• Connect the DC plug of the power adapter to the socket at the bottom.
• Connect the power adapter to a suitable mains outlet.
• Turn on the product by switching the power switch to the I position. The LEDs light
up and the mirror ball starts rotating.
• The spotlights can be freely adjusted.
The product is suitable for max. 72 hours of continuous operation. After
72 hours it must be switched off for at least 1 hour.
Maintenance and cleaning
Before cleaning, turn off the product, let it cool down sufficiently, and
disconnect the power adapter.
• Never use aggressive cleaning agents or chemical solutions, as such would
damage the housing (discolorations).
• Besides occasional cleaning, the device is maintenance-free. There are no user-
serviceable parts inside the product. Therefore never open the product.
• Use a dry and lint-free cloth to clean the product. For more resistant stains, use a
cloth that is slightly moistened with lukewarm water.
• Do not apply too much force when cleaning in order to avoid scratching.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Input voltage ........................................ 2 30 – 240 V/AC, 50 Hz (adapter)
Output voltage/current . ......................12 V/AC, 500 mA (adapter)
Power consumption............................6 W
Illuminant . ............................................. 6 LEDs per spot (2 x red, 2 x green, 2 x blue)
Mirror ball Ø . ........................................127 mm
Operating conditions ..........................+10 to +35 °C, 0 – 80 % RH
Storage conditions..............................-10 to +40 °C, 0 – 90 % RH
Dimensions (W x H x D)......................270 x 232 x 133 mm
Weight . ..................................................620 g
12 V/AC (station)
4 LEDs on the base (2 x red, 2 x blue)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
V1_0316_02-ETS-Mkd
Werbung
Inhaltsverzeichnis
