Herunterladen Inhalt Inhalt Diese Seite drucken

D) Manual Colour Setting; Maintenance And Cleaning - Renkforce LV-PT12 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Automatic Mode With Setting Option
• Push the button MENU (5), until "A7" shows in the display (4), followed by a number. The number is the colour
selection.
• Select the desired colour with the UP (6) and DOWN (7) buttons:
Display
A7.01
A7.02
A7.03
A7.04
A7.05
A7.06
• Push the button ENTER (8) and select the desired effect speed with the buttons UP (6) and DOWN (7)
(A7.01 = slow / A7.32 = fast).
• Push the ENTER button (8) again to save the setting.

d) Manual Colour Setting

This function generates a mixed colour by brightness control of the red, green and blue channels.
• Push the button MENU (5), until "r" shows in the display (4), followed by a number. The number represents the
brightness of the red colour share (000 = dark to 255 = light).
• Push the button MENU (5), until "G" shows in the display (4), followed by a number. The number represents the
brightness of the green colour share (000 = dark to 255 = light).
• Push the button MENU (5), until "b" shows in the display (4), followed by a number. The number represents the
brightness of the blue colour share (000 = dark to 255 = light).

12. Maintenance and Cleaning

Always observe the following safety instructions before cleaning or servicing the effect light:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work is carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected from all
power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations must perform repairs.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since these may
damage the casing or even impair function.
• Always disconnect the product from the power supply before cleaning it.
• Use a dry, lint-free cloth for cleaning the product.
Colour
Display
Colour change
A7.07
red
A7.08
green
A7.09
blue
A7.10
light green
A7.11
light blue
Colour
violet
Change red/green
Change red/blue
Change green/blue
Change red/green/blue
31

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

1518600

Inhaltsverzeichnis