Safety Instructions; Scope Of Delivery; Controls - VOLTCRAFT SL-100 Bedienungsanleitung

Troubleshooting
In purchasing this device you have acquired a product which has
been designed with state-of-the-art technology and is operationally
reliable.
Problems and malfunctions may, however, still arise.
For this reason, the following is a description of how you can elimi-
nate possible malfunctions yourself.
Always adhere to the safety instructions!
Fault Possible cause
The measuring unit Is the battery dead?
does not work. Check the charge condition of the battery.
None Change in
measured value. Is the HOLD function active?
Repairs other than those just described should only be
performed by an authorised electrician.
If you have queries about handling the measuring
device, our technical support is available under the fol-
lowing telephone number:
Voltcraft, 92242 Hirschau, Tel. no. 0180 / 586 582 723 8
Disposal
If the device has reached the end of its operational life,
please dispose of accordingly.
28

Scope of delivery

Sound level detector with windshield
Compound 9V battery
Operating instructions
Storage box (only order no.: 10 06 79)
Controls and indicators
1 Windshield
2 Standard microphone, unscrewable
3 3.5-digit display
4 ON/OFF button
5 Button for lighting (SL-200)
Button for Max-Hold (SL-100)
6 A/C Button
7 Battery compartment on the back side
8 Max-Hold/Hold button (SL-200)
Hold button (SL-100)
9 Hi/Lo button
10 F/S button
Display symbols
MAX The highest value is held continuously
HOLD The momentary reading is held
FAST Fast time evaluation (125 ms/measurement)
SLOW Slow time evaluation (1 ms/measurement)
Hi The upper measurement range is selected
Lo The lower measurement range is selected
BAT Battery replacement display
dBA Evaluation filter for A-curve (= hearing)
dBC Evaluation filter for C-curve (= linear)
OVER Measured value exceeds the measurement range
1
2
3
4
5 10
9
6
8
7
21