Conrad Profi Bedienungsanleitung Seite 34

Measuring capabilities of the Weather Station:
- Room temperature and humidity with air pressure as well as one of 8 further
temperatures with assigned humidity.
- Up to 9 different combined humidity/temperature measuring points of which
two can be simultaneously displayed.
- Calculation and display of the windchill equivalent temperature (perceived
temperature).
- Dew points, which are separately computed for every one of the 9
temperature/humidity sensors.
- Air pressure, selectable in hPa or mm.
- Air pressure tendency (constant, increasing, strongly increasing, decreasing,
strongly decreasing).
- Graphic display of the air pressure changes within the last 24 hours.
- Icon display for weather forecast (sunny, bright, cloudy, rainy).
- Wind strength, selectable in km/h, m/s, knots or Beaufort.
- Wind direction in form of a compass with display of the variations of wind
direction (in place of the wind strength the wind direction can be displayed
with a 5º resolution).
- Integrated Radio-Controlled Clock for exact time assignment of measured
values.
- Storage of minimum and maximum measured values for all sensors incl.
assigned time and date assertion (in case of wind strength the assigned wind
direction is additionally displayed).
- Acquisition of rain volume with < 0.5 mm resolution (total, 24h, 1h).
- Programmable alarm cababilities at various weather conditions, e.g. danger
of frost, storm, adverse air pressure or temperature tendencies, e.g. at sea or
in the mountains or as an indication for the so called bio weather.
- All important weather informations are simultaneously displayed on the LCD,
making it unnecessary to perform any special handling of the device to
recognize the present weather.
- Several Base Stations can be operated simultaneously in order to display the
sensor data at various places at the same time. Additional Base Stations can
be ordered optionally.
Please read this Operation Manual carefully and completely before first setup
in order to avoid functional disturbances and mishandling. Especially observe
the notes on mounting and calibration of the measurement sensors.
The indoor and outdoor sensor system of the Weather Station works by exclusive
use of remote data transmission. Remote sensors can thus be placed and mounted
as far as 100 m from the Base Station in open field (strongly depending on the local
environmental conditions). The outdoor sensors get their operating power from
integrated solar cells. Please therefore carefully observe the notes on placing and
mounting of these components in order to guarantee regular function of the total
system.
34