Aux In Operation - Silvercrest SBLD 28 A1 Bedienungsanleitung

AUX IN operation

You can also listen to music from a portable audio device connected
via a 3.5 mm jack cable.
♦ Ensure that the speaker is switched off.
♦ Connect the audio device using a 3.5 mm jack cable to the
3.5 mm jack socket
♦ Set the On/Off switch
speaker on.
♦ Start playback on the audio device and set the volume to a
moderate level.
♦ Then set the desired volume using the
( )
♦ Press the
NOTE
► If you connect a 3.5 mm jack cable to the device during the
playback of audio files via Bluetooth
playback automatically to the newly connected device.
► If you use a smartphone as your Bluetooth
the audio playback will be paused when there is an incoming
call. Acceptance/termination of the call is carried out via the
smartphone. After finishing the call, the playback will be auto-
matically continued.
│ GB │ IE │ NI
■ 14
on the speaker.
to the ON position to turn the loud-
button on the speaker.
button if you want to mute the speaker.
( ) button or the
, the device will switch
®
playback device,
®
SBLD 28 A1