Speaker Operation; Aux-In Operation - Silvercrest SMA 500 A1 Bedienungsanleitung

Speaker operation

GB
♦ Completely unwind the speaker cable
CY
storage (underside of device).
♦ Connect the 3.5 mm jackplug of the speaker cable
playback device.
♦ Switch the speaker on by moving the On/Off switch
the ON position. The operating LED
♦ Switch on your player and select the required volume using
the volume control
♦ To obtain a rich bass tone, move the BASS switch
ON position.
♦ To switch the speaker off again, move the On/Off switch
to the OFF position. The operating LED

Aux-In operation

Many electronic entertainment devices are equipped with a 3.5 mm
jack socket. If your player has a connector that diff ers from the audio
output socket, use a suitable adapter if necessary, or connect it to the
AUX-IN
adapter/adapter cable is available from specialist dealers.
NOTE
► If you have connected playback devices to the AUX-IN
connection socket
time, only the sound from the AUX-IN connection socket
will be played.
10
5
connection socket using an adapter cable. The relevant
2
2
.
and the speaker cable
from the cable
8
8
4
3 illuminates in blue.
to the
6
3 goes out.
at the same
8
SMA 500 A1
to your
to
4
2