Operation; Using The Cable Retainer; Connecting Headphones; Inserting The Headphones - Silvercrest SKSK 4 A1 Bedienungsanleitung

Operation

Using the cable retainer

You can use the cable retainer when storing the headphones
save space and protect the headphones.
■ Place the earphones in the recesses on the cable retainer and
feed the cable through the recess.
■ Wind the cable in a clockwise direction around the cable retainer.
Finally, place the jack plug into the corresponding recess on the
cable retainer.

Connecting headphones

The headphones
entertainment devices have a corresponding headphone socket. If
your audio device has been equipped with a different headphone
connector, you may need to use a suitable adapter
(not supplied).

Inserting the headphones

■ When putting on the headphones
indicators "R" (right) and "L" (left) on the earpieces.
SKSK 4 A1
are equipped with a 3.5 mm jack. Many electronic
, pay attention to the side
GB
to
│
7 ■