Items Supplied; Operation - Silvercrest SKH 64 D3 Bedienungsanleitung

4. Items supplied

1 set of headphones
1 set of operating instructions
In the case of incomplete delivery, please contact the responsible service
centre of the manufacturer see "Warranty of HOYER Handel GmbH".
Please observe the illustrations on the fold-out page.

5. Operation

• Remove all packing material.
• Check that the device is undamaged.
Connecting
1. Set the sound source to a low volume.
2. Insert the TRS connector 7 into the headphone socket of the sound
source (e.g. MP3 player, television).
Put on the headphones
1. Put on the headphones in such a way that the marking R is on the
right and L is on the left.
2. Figure A: Adjust the size of the headphones to your head size using
the two adjustable headphone earpieces 3 and 5 by pulling out or
pushing in the brackets 2.
3. Set the volume of the sound source. Ensure that you are still able to
hear sounds in your surroundings.
Connecting a second set of headphones
WARNING! Risk of material damage!
Connect only one set of headphones, no splitters, and no additional
audio sources, in order to avoid damage to the device.
The socket 4 can be used to attach a second set of headphones with a
3.5 mm TRS connector, to allow a second person to listen in.
20
GB