General Notes On Safety; General Safety Instructions For Power Tools - FLORABEST FHT 900 B3 Betriebsanleitung

GB
Caution! Risk of injury from blades
in operation.
Pull out the power plug immediately
if the cable is damaged, has been
badly twisted or is completely cut
through and in the event that the
device is left unattended for a short
time.
Caution! Hot surface.
Risk of burns.
Information of the acoustic power
level L in dB.
WA
Machines are not to be place with
domestic waste.
Safety class II
Cutting length

General Notes on Safety

Before working with the equip-
ment, familiarise yourself with all
operating components. Practice
handling the equipment and have
the function, operation and working
methods explained to you by an ex-
perienced user or specialist. Ensure
that you can shut off the equipment
immediately in an emergency. Inap-
propriate use of the device may
result in serious injury.
If an accident or fault occurs during opera-
tion, immediately switch off the device and
disconnect at the plug. Treat injuries ap-
propriately or consult a doctor. For the cor-
rection of faults, read the "Troubleshooting"
chapter or contact our service centre.
36
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
Work area safety
Keep work area clean and well
•
lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in
•
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
Keep children and bystanders
•
away while operating a power
tool. Distractions can cause you to
lose control.
Electrical safety
Power tool plugs must match
•
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock