Motor Commissioning; A) Commissioning The Remote Control; Charging The Flight Battery; C) Mounting The Elevator And Rudder Linkage Rods - Reely Phönix Plus Bedienungsanleitung

9.

Motor Commissioning

a) Commissioning the Remote Control

In the operating instructions for the flight model, only the control elements are illustrated in the figures of the remote
control. They therefore serve illustration purposes only. The precise function of the remote control is explained in the
separately enclosed operating instructions of the remote control system.
b) Charging the Flight Battery
Charge the flight battery according to the information of the charger used. Mostly observe the safety notes in these
operating instructions and the operating instructions of the charger.

c) Mounting the Elevator and Rudder Linkage Rods

Put the rudder horns of the servos for the elevators and rudders in the neutral position by taking the receiver system
into operation. Also observe the information in chapter „Checking the Control Functions". Shorten the rods for elevator
and rudder at the dampening areas by twisting the clevises in or out so that the dampening surfaces are in neutral
position and attach the clevises to the rudder horns (1 and 2).
For elevators and rudders, the clevises should be attached to the outer hole of the rudder horn for the first flights. The
correct function is explained in chapter „Checking the Control Functions".
Figure 7
42