Introduction; General Notes; Supplied Package; Technical Data - Scheppach biostar 3000 Originalbetriebsanleitung

Manufacturer:
Scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working expe-
rience with your new machine.
Note:
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled work-
ers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-
compliance with the electrical specifications and
the VDE 0100, DIN 57113 / VDE 0113 regulations
Recommendations:
m Read the entire text of the operating instructions
prior to the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and uti-
lize its intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with
your machine and how to avoid dangers, save repair
costs, reduce downtime, and increase the reliability
and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable reg-
ulations of your country with respect to the operation
of the machine.
Put the operating instructions in a clear plastic folder
to protect them from dirt and humidity, and store them
near the machine. The instructions must be read and
carefully observed by each operator prior to starting
the work. Only persons who have been trained in the
use of the machine and have been informed on the
related dangers and risks are allowed to use the ma-
chine. The required minimum age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of
your country, the generally recognized technical rules
for the operation of wood working machines must be
observed.

General Notes

• When you unpack the device, check all parts for
possible transport damages. In case of complaints
the supplier is to be informed immediately. Com-
plaints received at a later date will not be acknow-
ledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself
familiar with the device prior to using it.
• Only use original parts for accessories as well as
for wearing and spare parts. Spare parts are avail-
able from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders
Biostar 3000
Delivery
The protective cover is installed with a blade disc and an
electronic unit
Frame parts, wheels, axle
Filling funnel and chute, flap
Insulation mat, chute trim, cover
Installation tools enclosed in a tool bag
Operation instructions

Technical Data

Dimensions L x W x H mm
Input height mm
Output height mm
Infeed opening max. mm
Outfeed opening max. mm
Wheel ø mm
Weight kg
Power
Branch thickness max ø mm
Shredding tools
Blade disc ø mm
Turning knive mm
Infeed worm ø mm
Drive
Motor V/Hz
Consumption power P
Revolutions 1/min
Operating mode
Splashproof
System fuse protection
*P40 intermediate duty = 40% operating time, 60%
idle time
Subject to technical changes!
Noise Information
2000/14/EC and EN ISO 3744:1995
Test report TR.505010019.001 dated 2.11.2016
TÜV-SÜD
Sound pressure level L
wag
Sound pressure level on working site L
Permissible operating times
Noise protection equipment is required (wear ear de-
fenders).
Operating times for garden shredders are restricted
due to high noise levels in nearls all countries (for
example on Sundays, holidays or evenings). Please
note the valid regulations for your area.
In these operating instructions we have marked
the places that have to do with your safety with
this sign: m
603x536x1402
1402
320
130x160
60x365
180
52
45
355
4 x40x104
80
230 V / 50 Hz
(400V/50Hz)
2,6 KW (P40*)-(3,5
KW(P40))
2820 (2850)
P40 (S6/25 %)
P24
Slow-blow D Typ, 16
Amp(3x16Amp)
108 dB (A)
89 dB (A)
pA
English 17