Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating in-
structions, you have to meet the applicable regulations
that apply for the operation of the machine in your coun-
try. Keep the operating instructions package with the ma-
chine at all times and store it in a plastic cover to protect
it from dirt and moisture. Read the instruction manual
each time before operating the machine and carefully
follow its information. The machine can only be operated
by persons who were instructed concerning the opera-
tion of the machine and who are informed about the as-
sociated dangers. The minimum age requirement must
be complied with.
16
GB
All manuals and user guides at all-guides.com
2. Layout (Fig. 1 +2)
1
Feeding hopper
Hand screw
2
Collect box
3
Support foot
4
5
Wheel
6
collect box locking handle
7
On/off switch
8
Plug (connection for extension cable)
Shredder Body
9
10 Overload protection (Reset)
11 Push stick
12 Wheel axle
3. Scope of delivery
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packa-
ging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty pe-
riod has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be
allowed to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation!
Machine
•
2 x wheel
•
2 x wheel cover
•
Collection box
•
Wheel spindle
•
2 x wheel spindle sheath
•
2 x washer
•
2 x nut
•
Internal hex wrench
•
External hex wrench
•
Flat push stick
•
If any parts are missing or damaged, please con-
tact your dealer.
4. Proper use
CE tested machines meet all valid EC machine
guidelines as well as all relevant guidelines for each
machine.
• The machine has been built in accordance with state-
of-the-art standards and the recognized safety rules.
Nevertheless, ist use may constitute a risk to life and
limb of the user or of third parties, or cause damage
to the machine and to other material property.
Werbung
Kapitel
Fehlerbehebung
