Moon Phases; Preparing To Use The Weather Forecasting Function; Reading The Barometric Pressure; Reading The Barometric Pressure For The Last 12 Hours - Auriol Z31092 Bedienungsanleitung

Operation
To check the setting / rising time for other
location & date, press and hold down the
SUN / MOON button 31 for about 3 sec-
onds to access the setting / rising time of the
sun or moon quick control mode. The loca-
tion 8 flashes.
Set the country, city, year, month and the
day for which you wish the information to be
displayed by pressing the SUN / MOON
button 31 or the / button
/ 12 / 24 button .
14
Press the SUN / MOON button
firm your settings.
Note: The sun and moon setting or rising
time flashes while the values are being
calculated.
Note: If the next moon rising or setting is
on the following day, the display shows
MOONRISE+1 or MOONSET+1.

Moon phases

The following moon phases are shown by the
moon phase symbol 6 :
New moon Waxing half- Half-moon
moon
Full moon Waning full Half-moon
moon
Preparing to use the weather
forecasting function
Note: Please take the weather forecast from
your local weather forecasting service into account
as well as the forecast from your weather station.
If there are discrepancies between the information
from your device and from the local weather
forecasting service, please take the advice of the
latter as authoritative.
Press the HISTORY / WEATHER button
for about 3 seconds. The weather symbol
flashes.
Set the current weather by pressing
the "+" / °C / °F button or the
28
"–" / MAX / MIN button 29 .
You can choose between the following
weather symbols:
= sunny
= light clouds
10 GB/IE
11 or the
31 to con-
Press the HISTORY / WEATHER button
confirm your settings.
Note: Ensure that you have set the current
weather correctly, otherwise the weather
forecast will not be correctly displayed.
The weather station starts with the weather
forecast approximately 6 hours after you
enter the current weather.
The weather station can display the barometric
pressure trend
displays:
= the barometric pressure will rise.
= the barometric pressure will remain
Waxing full
constant.
moon
= the barometric pressure will fall.
Waning half-
moon
Reading the barometric
pressure
Press the Relative / absolute barometric pres-
sure button
and absolute barometric pressure display.
Note: The display shows "Abs" if you have
selected absolute pressure. The display shows
"Rel" if you have selected relative pressure.
Note: The absolute barometric pressure is
measured by the weather station.
Set the relative barometric pressure to the
barometric pressure relative to that at sea
level. Ask your local weather forecast service
for the barometric pressure at sea level.
27
Press and hold down the Relative / absolute
1
barometric pressure button
3 seconds.
Set the current barometric pressure by press-
ing the "+" / °C / °F button
"–" / MAX / MIN button
Press the Relative / absolute barometric
pressure button
Reading the barometric
pressure for the last 12 hours
Press the HISTORY / WEATHER button
to read the barometric pressure values for
the last 12 hours.
= cloudy
= cloudburst /
storm
= rainy
to
27
25 . You may see the following
30 to switch between the relative
30 for about
28 or the
.
29
30 to confirm your settings.
27