Activating / Deactivating The Alarm Function; Displaying The Sun And Moon Rising / Setting Times; Moon Phases; Preparing To Use The Weather Forecasting Function - Auriol Z29536 Bedienungs- Und Sicherheitshinweise

j
Press and hold down the MODE button
for about 3 seconds. The hour value
flashes. Press the
/ 12 / 24 button
value.
tip: By keeping the
/ 12 / 24 button
ate the process and reach the desired value
more quickly. This quicker method can also
be used for making the other settings. If dur-
ing a period of 15 seconds no buttons are
pressed, the LC display returns automatically
to the default display.
j
Press the MODE button
flashes. Press the
/ 12 / 24 button
value.
j
Confirm your settings by pressing the MODE
button .
15
Activating / deactivating the
Q
alarm function
j
Press the MODE button
activate or deactivate the alarm mode.
j
Press the ALARM button
alarm function. The Alarm symbol
in the LC display.
j
Press the ALARM button
the alarm function. The Alarm symbol
disappears from the LC display.
j
The alarm will sound when it reach to the set
time. Press the MODE button
button , the / 12 / 24 button
11
SNOOZE / LIGHT button
the alarm signal. Otherwise the alarm signal
sounds for about 2 minutes then stops auto-
matically.
Displaying the sun and moon
Q
rising / setting times
note: The calculated times of setting and rising
of the sun and moon are intended for orientation
only. You should contact your local weather fore-
casting service for the exact times.
note: After you have completed all the settings
(see"setting the date / language / clock / time
zone), the weather station calculates the rising and
setting times of the sun and moon. The setting /
rising time of the sun or moon flashes during this
operation.
j
Press the SUN / MOON button
the calculated sunshine hours of the selected
day.
j
To check the setting / rising time for other
location & date, press and hold down the
SUN / MOON button
onds to access the setting / rising time of the
sun or moon quick control mode. The loca-
tion flashes.
8
15
/ button or the
11
to set it to the desired
14
/ button or the
11
pressed, you acceler-
14
. The minute value
15
/ button or the
11
to set it to the desired
14
to access the
15
to activate the
10
appears
13
to deactivate
10
13
, the /
15
or the
14
to switch off
12
to display
31
for about 3 sec-
31
j
Set the country, city, year, month and the
day for which you wish the information to be
displayed by pressing the SUN / MOON
button or the
31
/ 12 / 24 button
j
Press the SUN / MOON button
firm your settings.
note: The sun and moon setting or rising
time flashes while the values are being
calculated.
note: If the next moon rising or setting is
on the following day, the display shows
MOONRISE+1 or MOONSET+1.

Moon phases

Q
The following moon phases are shown by the
moon phase symbol
6
New moon Waxing half-
moon
Full moon Waning full
moon
Preparing to use the weather
Q
forecasting function
note: Please take the weather forecast from
your local weather forecasting service into account
as well as the forecast from your weather station.
If there are discrepancies between the information
from your device and from the local weather
forecasting service, please take the advice of the
latter as authoritative.
j
Press the HISTORY / WEATHER button
for about 3 seconds. The weather symbol
flashes.
j
Set the current weather by pressing
the "+" / °C / °F button
"–" / MAX / MIN button
You can choose between the following
weather symbols:
Operation
/ button or the
11
.
14
to con-
31
:
Half-moon Waxing full
moon
Half-moon Waning half-
moon
27
or the
28
.
29
= sunny
= light clouds
= cloudy
GB/MT 41
1