Automatic Group Cleaning And Degreasing; Prophilactic Descaling (For Water Tank Machines) - ECM Eletronika Profi Bedienungsanleitung

Clean the steam and hot water valve after every use.
Clean the body when the machine is switched off and cold.
Use a soft and damp cloth for cleaning.
Never use abrasive or chloric detergents!
Empty the water drip tray regularly and do not wait until it is full.

7.2 Automatic group cleaning and degreasing

Group cleaner in powder or tablet form for easy cleaning and degreasing of the brewing group is available at your
specialised dealer. The group cleaning with our tablets can be carried out every week.
The cleaning is carried out using the blind filter included in delivery:
1 Heat up the machine.
2 Put the blind filter into the filter holder.
3 Fill the blind filter with ½ sachet of group cleaning powder or insert one tablet.
4 Place the filter holder in the housing of the group.
5 Start the brewing group cleaning mode by keeping the star key pressed and pressing button 1 (espresso).
A running light appears on the control panel. Please wait until the running light has stopped and all buttons of
the control panel light up again
6 Remove the filter holder and rinse it. Then place it in to the housing of the group again.
7 Press the star key shortly to make sure that the degreasing residues in the group are removed completely.
Caution!
Beware of hot spillings while cleaning the group.

7.3 Prophilactic descaling (for water tank machines)

A regular descaling of the machine is recommended to avoid strong calcification and expensive repairing. While
descaling, always take into account the hardness degree of the water. It is very important to use a sparing descaler
which does not affect the metal. At your specialised dealer, you can purchase a descaler (in powder or tablet form)
which is perfectly suited for your machine. Just fill the water tank with fresh water and dissolve the descaler in it.
Then proceed as follows:
1 Heat up the machine until the operative pressure has been reached (1.0-1.2 bar).
2 Switch off the machine.
3 Empty the boiler, operating the hot water dispensing. Then close the hot water dispenser again.
4 Mix the descaler with water according to the instructions and put it into the water tank.
5 Switch on the machine. Thus, the empty boiler is filled automatically with descaler liquid.
Instruction manual ELEKTRONIKA PROFI
25
ENGLISH