Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Machine Installation; Preparation For The Installation; Electrical Connection - ECM Eletronika Profi Bedienungsanleitung

Espresso-kaffeemaschine
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3.3 Technical data

Voltage:
Frequency:
Power:
Water tank:
Dimensions:
Dimensions with filter holder:
Weight:
4

MACHINE INSTALLATION

The installation is to be carried out exclusively by qualified staff and according to the following
instructions and in compliance with valid laws.
The following chapters deal with the preparation of the machine, its electricalconnection, water supply connection
and drain connection. Please note that for water tank machines, only the subchapters "Preparation of the machine"
and "Electrical connection" are relevant.

4.1 Preparation for the installation

• Place the machine on an even and stable surface. You can regulate the height of the machine by
adjusting the feet of the machine.
• Never place the machine on hot surfaces.

4.2 Electrical connection

• Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
• Plug the machine only into an earthed socket and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
5

FIRST USE

5.1 First use
Read the instruction manual carefully before operating the machine.
Before starting the machine, check if:
• the steam and hot water valves are closed.
• the machine is switched off. (Power switch in lower position.)
• the power cord is disconnected.
• the drip tray is inserted accurately.
Now you can start up your machine:
1
Water tank machines: Open the cup warmer tray by flipping it open.
2
Water tank machines: Take out the water tank and rinse it thoroughly.
3
Water tank machines: Fill the water tank with fresh water deficient in lime and put it back into the water tank
guides and close the cup warmer tray again.
4
Plug the power cord into the power outlet and move the power switch into the upper position. Now the machine is
switched on.
5
The green control lamp lights up.
Instruction manual ELEKTRONIKA PROFI
EU/ UK/ NZ/ AU : 230 V
US: 120V, Japan: 100 V
60 Hz
1,200 W
approx.. 3.0 l
w x d x h / 322 mm x 472 mm x 380 mm
w x d x h / 322 mm x 570 mm x 380 mm
23 kg
21
ENGLISH

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis