ECM Eletronika Profi Bedienungsanleitung Seite 27

1
Brewing group in the beginning.
4
Remove the net filter and the gasket
completely.
7
Insert the net filter into the gasket.
10
Therefore, move the filter holder until the
net filter is locked firmly into the
gasket.
The machine can be used again, as described at page 23 of the instruction manual.
The steam nozzle is blocked
Clean the slots of the steam nozzle carefully with a needle or with a paper clip.
Instruction manual ELEKTRONIKA PROFI
2
Use a flat screwdriver to lever out the net
filter and the group gasket.
5
Keep the new spare parts ready at hand
(the chamfered side of the group faced
upwards to the brewing group).
8
Take the filter holder without filter.
11
Now you can easily lock the filter holder
into place.
27
3
The net filter and the gasket are now
nearly removed.
6
Clean the group with a brush.
Lock the net filter firmly into the gasket.
9
Clamp the filter holder to the group.
12
The group is ready for use.
ENGLISH