Intended Use; Explanation Of Symbols - Renkforce POWERPAR 6x8 W Bedienungsanleitung

3. Intended use

The PAR spotlight is used to generate light effects in light show equipment, party rooms, etc. and is con-
trolled by the built-in controller or an external DMX controller.
This product is only approved for connection to 100 - 240 V/50 - 60 Hz alternating current and only for use
with an earthed mains socket.
The DMX connections must only be connected to suitable DMX controllers or other DMX devices.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit,
fire, electric shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!

4. Explanation of symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from
electric shock. The device contains no parts that require servicing by the user. Therefore, never
open the device.
The exclamation mark indicates important notes in these operating instructions that must be
strictly observed.
The arrow symbol indicates special advice and operating information.
This symbol with the house informs the user that the device must only be used in enclosed rooms.
This symbol on the device indicates that the user must read these operating instructions before
using the product and observe them during operation.
This symbol indicates the minimum distance to the illuminated surfaces.
25