Renkforce POWERPAR 6x8 W Bedienungsanleitung Seite 34

Setting the DMX operating mode
• Push the button MENU until "CHnd" is displayed and push the button ENTER.
• Select the desired operating mode with the UP and DOWN buttons:
4CH 4-channel DMX mode
6CH 6-channel DMX mode
8CH 8-channel DMX mode
• Press the ENTER button to confirm your selection.
The following tables provide information about the effects of the settings on the individual DMX channels.
4-channel DMX mode
DMX channel Value
1 000-255
2 000-255
3 000-255
4 000-255
6-channel DMX mode
DMX channel Value
1 000-255
2 000-255
3 000-255
4 000-255
5 000-255
6 000-006
007-065
066-069
070-128
129-132
133-191
192-195
196-255
34
Function
Brightness setting red dark > bright
Brightness setting green dark > bright
Brightness setting blue dark > bright
Brightness setting white dark > bright
Function
Brightness setting red dark > bright
Brightness setting green dark > bright
Brightness setting blue dark > bright
Brightness setting white dark > bright
Setting total brightness
Continuous light
Strobe effect slow > fast
Lights off
Pulsing strobe effect slow > fast
Lights off
Strobe effect with fade-in slow > fast
Lights off
Strobe effect with fade-out slow > fast