Replacing Of The Illuminant; Trouble Shooting - Pkm KS 130.4 A++ Bedienungsanleitung

WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. RISK OF ELEKTRICAL
SHOCK!
1. Remove the contents and put them into a cooling box.
2. Switch off the appliance by turning the thermostat to position 0/AUS/OFF and
disconnect it from the mains.
3. When the encrusted ice melts put some dry cloths into the appliance to hold the
water back.
4. Do not support the defrosting procedure with hot water.
5. Remove the big pieces of ice first. Then remove the small pieces of ice.
6. Clean and dry the appliance and door seals with soft cloths.
7. Leave the door of the appliance open for a while.

5.2 Replacing of the illuminant

WARNING! Switch off the appliance and pull the plug out of the socket
1.
before you change the illuminate.
2. Remove the cover.
3. Replace the illuminant by a new one of the same kind and power.
4. Reinstall the cover.
 According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the ecodesign requirements for non-
directional household lamps. This means that bulbs, which are used in
household appliances, must not be used to illuminate domestic establishments.

6. Trouble shooting

POSSIBLE CAUSE
 The plug of the appliance is not
connected to the socket.
 The plug has become loose.
 The socket is not supplied with
energy.
 The fuse is switched off.
 The voltage is too low.
MALFUNCTION
The appliance does not work at all.
MEASURE
 Check the corresponding socket by
connecting it with another appliance.
 Check the fuse box.
 Compare the data on the model
plate with the data of your energy
supplier.
32