Clock Functions - Electrolux EOC3410 Benutzerhandbuch

5.3 Display
Timer
1
Heat-up and residual heat indicator
2
Water tank (selected models only)
3
Core temperature sensor (selected
4
models only)
Door lock (selected models only)
5
Hours / minutes
6

Clock functions

7
5.4 Buttons
Button
,
5.5 Heat-up and residual heat
indicator
When you activate an oven function, the
bars in the display
one. The bars show that the oven temper-
ature increases or decreases.
6. CLOCK FUNCTIONS
Sym-
bol
Press
change the clock function.
Press
of the clock functions, or wait 5
seconds for the setting to be con-
firmed automatically.
Function
Clock
Minus, plus
come on one by
Function
Minute Minder To set a countdown time.
Time of day To set, change or check the time of day. Refer to "Set-
ting the time of day".
Duration To set how long the appliance must operate. First set an
oven function before you set this function.
End To set when the appliance must be deactivated. First set
an oven function before you set this function. You can
use Duration and End at the same time (Time Delay) to
set the time when the appliance must be activated and
then deactivated.
again and again to
to confirm the settings
7
7
Description
To set a clock function.
To set the time.
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more
than 40 °C. Turn the temperature knob
left or right to show the oven temperature
on the display.
Description
6.1 Setting the Duration or End
function
1.
Press
symbol
play.
ENGLISH
1 2
6 5
again and again until the
or flashes in the dis-
9
3
4