General Notes On Safety; Working With The Equipment - Parkside PHD 100 D2 Betriebsanleitung

Instruction symbols (the instruction
can be explained at the place of
the exclamation mark) with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.

General notes on safety

• Children should be supervised to en-
sure that they do not play with the ap-
pliance.
• Use the equipment only on a flat, sta-
ble surface.
• The transport handle is exclusively for
transporting the equipment. The equip-
ment is portable but not to be carried
during operation.
• For your safety, it is recommended that
you wear safety glasses, safety boots
and gloves and, if necessary, ear pro-
tection.
• In the event of a fault or defect dur-
ing operation, immediately switch off
and unplug the equipment. Then read
page 32 of the operating instructions
for possible fault causes or contact our
service centre.

Working with the equipment

Caution: to avoid accidents and
injuries:
CAUTION. pressure wash-
ers can be dangerous if
they are not operated cor-
rectly! The jet must never
be directed at people,
animals, electric equipment
connected to the power
supply or against the actual
pressure washer.
• Do not direct the jet at yourself or oth-
ers in order to clean clothes and shoes.
• Do not operate the pressure washer
when other people are in the immedi-
ate vicinity, other than they are also
wearing protective clothes.
• Always use the spray gun with both
hands. This will enable you to safely
counter the recoil force from the emerg-
ing water jet.
• Take appropriate measures to keep
children away from the equipment
whilst it is running.
• Dispose of the packaging material cor-
rectly.
• Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire
or explosion.
• Do not spray combustible liquids. Risk
of explosion.
• Store the equipment in a dry place and
out of reach of children.
• Children must be supervised in order
to ensure that they do not play with the
equipment.
• Ensure that no exhaust emissions occur
within the vicinity of air inlets.
Caution! To avoid damage to the
equipment and any possible
person injury resulting from this:
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist
check that the required electrical pro-
tection measures are in place.
• Never operate the pressure washer if
the power supply cable or other impor-
tant parts, such as the high-pressure
hose or the gun, are damaged.
GB
31