Product Description - VOLTCRAFT VC-22 Bedienungsanleitung

• If you suspect that safe operation is no longer possible, stop using the device
immediately and prevent unauthorised use. Safe operation can no longer be as-
sumed if:
- There are signs of damage
- The device does not function properly
- The device was stored under unfavourable conditions for a long period of time
- The device was subjected to rough handling during transport.
• Do not switch the measuring device on immediately after it has been brought
from a cold room into a warm one. The condensation generated may destroy the
product. Leave the device switched off and allow it to reach room temperature.
• Do not leave packaging material lying around carelessly, as it may become a
dangerous toy for children.
• Observe the safety information in each section.

6. Product description

The multimeter (referred to as DMM in the following) indicates measured values on a digital
display. The measuring value display of the DMM comprises 4000 counts (count = smallest
display value). The DMM automatically sets the appropriate measuring range (AUTO range).
The measuring device can be used in both hobby and professional fields (up to CAT III 600 V).
The measurement modes are selected using the rotary dial.
The DMM is switched on and off via the rotary switch position "OFF". Always turn the measuring
device off when it is not in use.
Insert the batteries before using the measuring device.
Insert the battery as described in the chapter "Cleaning and Maintenance". The power supply
requires two AAA 1.5 V batteries. These are supplied with the device.
27