Configuration; Overview Of The Functions And The Default Settings - Guntermann & Drunck FIBREVision Installationsanleitung

Configuration

The configuration of the FIBREVision system can optionally be changed in the setup
mode or in the setup menu:
 Enable the setup mode using the console keyboard. You can change the configura-
tion via special setup keys.
 The setup menu is operated with a terminal emulator and provides a user interface
to configure the device.
IMPORTANT: Some functions of the FIBREVision system can only be carried out in
either the setup mode or the setup menu.

Overview of the functions and the default settings

The following table provides an overview of functions that can be configured in the
FIBREVision system. Detailed description of the functions is given in the following
pages.
Function
Activating the hotkey delay
Using single or double hotkeys
Changing the single hotkey
Changing the double hotkey
Changing the scancode set of a PS/2 keyboard
Support for special keyboards
Reinitialising USB input devices
Selecting the USB keymode
PS/2 AutoRepeat of computer modules
Changing the timeout of the automatic input lock
Authorising permanent console access
Changing the videomode of the user consoles
Choosing the EDID mode
Showing the last image after disconnection (Freeze) disabled
Optimising the video image
Activating or resetting a PS/2 mouse
Displaying the system's status information
Resetting the default settings
Configuration
Standard setting
enabled
single hotkeys
Ctrl
Ctrl+Shift
scancode set 2
disabled
disabled
PC Multimedia
enabled
1 second
disabled
enabled
Auto forward
G&D FIBREVision · 15
Page
19
20
21
22
23
24
24
25
27
28
29
30
31
32
33
35
36
37