Authorising Permanent Console Access - Guntermann & Drunck FIBREVision Installationsanleitung

Authorising permanent console access

NOTE: This function can only be (de)activated in the setup menu.
If the user makes no inputs at the active console during the adjusted timeout of the
automatic input lock (default: 1 second), the default settings of the FIBREVision sys-
tem also permit to operate the system from the other console.
If the Authorising permanent console access function is activated in the setup menu, the
users of the FIBREVision system are enabled to permanently activate the input lock
by pressing Hotkey+PrtScr
After this key combination has been pressed, the input devices of the concurrent
console are deactivated. By pressing the key combination again at the active con-
sole, both consoles are again able to operate the FIBREVision system after the auto-
matic input lock has elapsed.
If the permanent input lock is activated at one console, the Scroll LEDs are blinking
on the keyboards of both users.
How to (de)activate the Authorising permanent console access function:
1. Use the terminal emulator to establish the connection to the FIBREVision
system.
2. Use the arrow
3. Use the arrow
ting for the local console.
Use the arrow
ting for the remote console.
4. Press the
Space
 activation of the permanent input lock possible
Yes
 activation of the permanent input lock not possible
No
5. Press the Q key to leave the Console Access menu.
6. After you selected the desired setting, press the
Related topics:
 Changing the timeout of the automatic input lock on page 28
 Changing the videomode of the user consoles on page 30
(default: Ctrl+PrtScr
keys to select the Console Access
keys to select the Permanent Access CPU
keys to select the Permanent Access CON
key (repeatedly) to (de)activate this function:
).
row and press the
row to change this set-
row to change this set-
S key to save your settings.
G&D FIBREVision · 29
Configuration
Enter key.