Guntermann & Drunck FIBREVision Installationsanleitung Seite 107

Configuration
How to change the settings to optimise the video quality:
1. Press Hotkey+Backspace
mode. If the hotkey delay is active, press the key combination for seven
seconds.
2. Press one of the following setup keys to activate the desired profile for all
video channels of the KVM switch:
F1  activate profile for Best video quality
 activate profile for Accelerated desktop
F2
 activate profile for Accelerated video images
F3
 activate profile for Best performance
F4
1. Use the terminal emulator to establish the connection to the FIBREVision
system.
2. Use the arrow
3. Optional: Use the
channel whose settings you want to edit.
4. Use the arrow
(repeatedly) to choose between the following options:
on  activate High Dynamic Image Processing
 deactivate High Dynamic Image Processing
off
5. Use the arrow
Space key (repeatedly) to choose between the following options:
 transmit images with a colour depth of 24 bit
24b
 transmit images with a reduced colour depth of 18 bit
18b
6. Optional: Use the
video channel whose settings you want to edit.
7. Press the
S
34 · G&D FIBREVision
(default:
keys to select the row
arrow or arrow
or arrow keys to select the row
or arrow keys to select the row
or
arrow
key to save your settings.
Ctrl+Backspace
Video Optimisation
keys to select the column of the video
keys to select the column of another
arrow
) to activate the setup
and press Enter
HDIP and press the
Colour depth and press the
.
Space key