Querying The Diagnosis Functions (Getdiag) - Guntermann & Drunck FIBREVision Installationsanleitung

The following table lists the different fields as well as the possible states:
Field
FreezingActive
LocalVideoInput
StatusLocal
StatusRemote
USBStatus Mode="TRANS"
NOTE: Only KVM extenders with USB 1.1 support monitor the status of the trans-
parent USB bus.
For devices with USB 2.0 support the line
FAIL .

Querying the diagnosis functions (GETDIAG)

The command can be used to query different diagnosis information of the
GETDIAG
KVM extender.
Command:
<GETDIAG ReqID="123"/>
Exemplary answer of the KVM extender:
<DIAG Ver="1" ReqID="123">
<Resolution>1600x1200</Resolution>
<TemperatureLocal>35</TemperatureLocal>
<TemperatureRemote>37</TemperatureRemote>
</STATUS>
The following table lists the different fields as well as the possible states:
Field
Resolution
TemperatureLocal
TemperatureRemote
Description
active Freeze function
valid video signal at computer module
(CPU)
status of computer module (CPU)
status of user module (CON)
status of transparent USB bus
USBStatus Mode="Trans"
Description
resolution of the incoming video signal in pix-
els
temperature of computer module
(CPU) in °C
temperature of user module (CON)
in °C
Monitoring
Status
YES, NO
OK, FAIL
OK, FAIL
OK, FAIL
OK, FAIL
always displays
Value
width × height
rounded number
rounded number
G&D FIBREVision · 45