Inhaltsverzeichnis
Werbung
46
CORDLESS DRILL
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
Read through these operating instructions carefully
before using the appliance. Become familiar with
the functions and method of operation. To ensure proper
operation, always maintain the appliance according to the
instructions. The operating instructions and associated
documents should always be kept close to the appliance.
CONTENTS:
1. Machine data
2. Safety instructions
3. Mounting accessories
4. Operation
5. Maintenance
1. MACHINE DATA
TECHNICAL DATA
Voltage
Charger voltage
Charger frequency
Battery output
Charging time
Drill speeds
Max. torque (low speed)
No-load speed
Chuck capacity
Weight (incl. battery)
Lpa (sound pressure)
Vibration
PRODUCT INFORMATION
Fig. A
1. On/off switch
2. Speed selector switch
3. Torque setting ring
4. Chuck
5. Battery
6. Direction switch
CONTENTS OF CARRYING CASE
The carrying case contains:
1 Cordless drill
2 FDC-1800B batteries
1 FDC-1800L battery charger
2 Double-sided bits
1 Operating instructions
1 Safety instructions
1 Warranty card
Check the appliance, any loose parts and accessories for
damage caused during transport.
Ferm
Ferm
2. SAFETY INSTRUCTIONS
The following pictograms appear throughout these
operating instructions:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation
You don't need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Indoor use only
Do not use in rain.
Always recycle batteries
| 18 V — ---
| 230 V
Faulty and/or discarded electrical or electronic
| 50 Hz
apparatus have to be collected at the appropriate
| 1.3 Ah
recycling locations.
| 1 hour
| 2
When using power tools, you must observe the
| 20 Nm
follwing basic safety precautions in order to ensure
| 0-400/0-1150 rpm
protection from electric shocks, injury and fire.
| 0.8 - 10 mm
Read and follow all the instructions before using this
| 1.8 kg
power tool.
| < 75 dB(A)
Look after the notes on safety.
| < 2.5 m/s
2
•
Remove the battery block. When the power tool is
not being used, prior to maintenance and when
changing tools such as the clamping chuck, and drill.
•
The tool is suitable for use as a screwdriver and drill.
Any other application is specifically excluded.
IMPORTANT SAFETY NOTES ON CHARGER
AND BATTERY BLOCK
If you come into contact with acid from the battery
block, rinse it off with water immediately. If acid gets
into your eyes, rinse out your eyes at
once with water and contact a doctor immediately!
1. Read and note the operating instructions and safety
notes for the charger and battery block before use!
2. NB! Only use the charger and battery block that
were supplied by the manufacturer - otherwise you
will risk an accident.
3. Protect the charger, battery block and power tool
from moisture, e.g. rain or snow.
4. Always check that all cables are connected correctly
before using the charger.
5. If you discover that a cable is damaged, you should
3
Werbung
Inhaltsverzeichnis
